MOTORCYCLE

> MOTORCYCLE > X-OIL OUTBOARD 2T

Package : 1L 200L

X-OIL OUTBOARD 2T

DESCRIPTION

X-OIL OUTBOARD 2T is primarily designed for use in all modern excellent performance water cooled two-stroke engines and suitable for two-stroke engines manufactured by Evinrude, Johnson, Mercury, Mariner, Nissan, Suzuki, Yamaha or for the use where NMMA(National Marine Manufacturers Association) TC-W3 standard is required. X-OIL OUTBOARD 2T provides outstanding protection against cylinder scuffing, ring sticking, wear, rust and corrosion, resulting in extended engine life. And it prevents exhaust port plugging, spark plug fouling and harmful, power wasting pre-ignition to ensure extended spark plug and valve life and improve fuel economy. It may be used at manufacturers recommended fuel/oil ratios from 11:1 to 100:1.

PERFORMANCE

NMMA TC-W3, API TC, JASO FC/FD

PRODUCT PROPERTIES

Test Item Test Method Spec. Results
Appearance Visual Green Clear Green Clear
Specific Gravity ASTM D 287 Report 0.8717
Kinematic Viscosity(100℃), ㎟/s ASTM D 445 5.6 ~ 9.3 7.743
Viscosity Index ASTM D 2270 100 min 112
Flash Point, ℃ ASTM D 92 50 min 148
Pour Point, ℃ ASTM D 97 -25 max -36.0
Total Base No, mgKoH/g ASTM D 2.0 min 2.20
Suphated Ash, ℃ ASTM D 0.7 max. 0.20

MOTORCYCLE

> MOTORCYCLE > X-OIL OUTBOARD 4T

Package : 1L 200L

X-OIL OUTBOARD 4T

DESCRIPTION

X-OIL OUTBOARD 4T is primarily designed for use in all types of four stroke outboard engines manufactured by Evinrude, Johnson, Honda, Mercury, Mariner, Nissan, Suzuki, Yamaha and other manufacturers and it meets the latest requirements of the NMMA(National Marine Manufacturers Association) FC-W standard. X-OIL OUTBOARD 4T provides outstanding protection against oxidation, wear, rust and corrosion, resulting in extended engine life and the engine protection from moisture damages. And it ensures very high oil film resistance under all conditions by exhibiting excellent shear resistance and anti-foam properties to avoid foaming and air bubbles introduction into oil circuit.

PERFORMANCE

SAE 10W-40 : API SN/CF, NMMA FC-W

PRODUCT PROPERTIES

10W-40
Test Item Test Method Spec. Results
Appearance Visual Clear & Bright C & B
Density(g/㎤, 15℃) ASTM D 287 Report 0.8619
Kinematic Viscosity(100℃),㎟/s ASTM D 445 12.5 ~ 16.3 14.45
Viscosity Index ASTM D 2270 85 min. 145
Flash Point, ℃ ASTM D 92 200 min. 234
Pour Point, ℃ ASTM D 97 -25 max. -39.0
Apparent Viscosity( -25℃), Pa.S ASTM D 5293 7.0 max. 5.00
Oxidation Stability
(165.5℃, 24hr)
Viscosity Change Ratio JIS K 2514 1.5 max. 0.98
TAN Change ,mgKOH/g 1.6 max. 0.4
Lacquer Thin Nil

MOTORCYCLE

> MOTORCYCLE > X-OIL ULTIMATE 2T

Package : 0.8L 1L 200L

X-OIL ULTIMATE 2T

DESCRIPTION

X-OIL ULTIMATE 2T is primarily designed for air-cooled 2-stroke motorcycle engines whose manufacturers require the performance standard to meet JASO FB , API TC and the Global GB category. X-OIL ULTIMATE 2T is pre-diluted to facilitate ready mixing with gasoline over a wide temperature range, and suitable for direct injection and pre-mix engines. It is also recommended for the use in scooter, lawnmowers, weedeaters, and chinsaws. X-OIL ULTIMATE 2T provides outstanding wear protection and corrosion protection properties, resulting in extended engine life. And it ensures advanced deposit control, reduced ring sticking, prevention of preignition and extended spark plug and valve life, and is easy to mix with gasoline.
Note : It should not be used in water cooled engine and any four-stroke engines.

PERFORMANCE

API TC, JASO FB

PRODUCT PROPERTIES

SAE Viscosity(J1536) F/M2
Test Item Test Method Test Results
Density(15℃),kg/m³ ASTM D4052 0.859
Viscosity,100℃,㎟/s ASTM D 445 7.2
Viscosity,40℃,㎟/s ASTM D 445 43.2
Viscosity Index ASTM D 2270 129
Flash Point(C.O.C,℃) ASTM D 92 85
Pour Point, ℃ ASTM D 97 -39

MOTORCYCLE

> MOTORCYCLE > X-OIL ULTIMATE 4T SCOOTER

Package : 0.8L 1L 200L

X-OIL ULTIMATE 4T SCOOTER

DESCRIPTION

X-OIL ULTIMATE 4T SCOOTER -SN is primarily designed for the modern 4-stroke gasoline engines in motorcycles such as scooters and mopeds, and meets or exceeds the requirements of API SN performance rating and JASO MB specification. X-OIL ULTIMATE 4T SCOOTER-SN provides outstanding wear protection and excellent shear stability in all temperature, and advanced oxidation resistance and low volatility, resulting in extended oil grainage interval. And it ensures excellent lubrication and protection of engine and major components in all severe racing conditions. It also features correct oil viscosity that reduces friction at start-up and maximized lubrification during high temperature operation for fuel economy.

PERFORMANCE

API SN, JASO MB

PRODUCT PROPERTIES

SAE Viscosity(J1536) 5W-40 10W-40
Test Item Test Method Test Results
Density(15℃),kg/m³ ASTM D1298 0.849 0.861
Viscosity,100℃,㎟/s ASTM D 445 14.4 15.7
Viscosity,40℃,㎟/s ASTM D 445 83.9 104.8
Viscosity Index ASTM D 2270 178 129
Flash Point(C.O.C,℃) ASTM D 92 222 220
Pour Point, ℃ ASTM D 97 -42 -42

MOTORCYCLE

> MOTORCYCLE > X-OIL ULTIMATE 4T SL

Package : 0.8L 1L 200L

X-OIL ULTIMATE 4T SL

DESCRIPTION

X-OIL ULTIMATE 4T SL is primarily designed for all types of 4-stroke engines in motorcycles and meets or exceeds the requirements of API SL performance rating and JASO MA2 specification. X-OIL ULTIMATE 4T SL provides outstanding wear protection and excellent shear stability under severe operating conditions and advanced oxidation resistance under severe heat stress, resulting in extended engine and components life. And it ensures excellent thermal stability and deposit control for engine cleanliness, resulting in smooth and flawless operation and deposit resistance. It also features detergent and dispersive properties that provide excellent control of piston ring belt deposits for high output and acceleration.

PERFORMANCE

API SL, JASO MA2/MA

PRODUCT PROPERTIES

SAE Viscosity(J1536) 15W-40 20W-40 20W-50
Test Item Test Method Test Results
Density(15℃),kg/m³ ASTM D1298 0.856 0.874 0.873
Viscosity,100℃,㎟/s ASTM D 445 14.8 15 19.2
Viscosity,40℃,㎟/s ASTM D 445 98.4 133 168.8
Viscosity Index ASTM D 2270 156 114 130
Flash Point(C.O.C,℃) ASTM D 92 236 278 240
Pour Point, ℃ ASTM D 97 -33 -35 -36